Peptency Academy · Guide
Peptide stability in patches versus lyophilised vials
How does peptide stability in a microneedle patch compare with a lyophilised vial?
The solidification performed at lower temperature significantly improves storage stability of proteins, peptides, antibiotics, vaccines, and liposomes, which are marginally stable in aqueous solutions.1 Adv Exp Med Biol 2018 Exendin-4 kept up to 98.3 ± 1.5 percent of its activity in dissolving microneedles, but only after thermal, chemical and physical fabrication parameters had been tuned. Source sentence
optimising the parameters involved in DMN fabrication retained the activity of Ex-4 by up to 98.3 ± 1.5%2 Sci Rep 2018 The authors of a 2026 semaglutide patch study name loss of peptide activity and stability as challenges that remain. Source sentence
challenges persist regarding loss of therapeutic activity and stability of peptide3 AAPS PharmSciTech 2026
Known, not known, contested
Known
- Disaccharides such as trehalose and sucrose, and amino acids, can embed the active in a glass with low molecular mobility, which lowers chemical reactivity. Source sentence
Some excipients embed the active ingredients in glass-state solids with low molecular mobility, thereby reducing chemical reactivity.
1 Adv Exp Med Biol 2018 - In lyophilised peptide and polymer formulations, more moisture and more plasticiser raised the rate of deamidation. Source sentence
Increases in moisture and glycerol contents increased the rate of peptide deamidation.
4 J Pharm Sci 1999 - Water content weakens dissolving microneedles: in the exenatide hyaluronate study, strength fell as water content rose. Source sentence
the strength could be weakened as the water content increases
5 Pharm Res 2014
Not known
- A PubMed search on 11 November 2026 found no study that compares one peptide in a microneedle patch with the same peptide as a lyophilised vial. Source sentence
Query run on 11 November 2026; no head to head stability comparison in the results.
6 PubMed search for peptide patch and lyophilised stability, 11 November 2026
Contested
- The authors of the stratified exenatide patch conclude that the format reduces dependence on low-temperature storage. Source sentence
Abstract, final sentence: the stability result supports reduced dependence on low-temperature storage and transport.
7 Int J Pharm 2023
Patch and lyophilised vial side by side
| Question | Microneedle patch, as studied | Lyophilised vial |
|---|---|---|
| Stability in storage | Stability depends on the matrix and on fabrication. In one exenatide patch the remaining peptide did not differ between 40 °C and -20 °C over 3 months. Source sentencethe remaining EXT amount was not significantly different under storage at 40 °C and -20 °C for 3 months7 Int J Pharm 2023 | Freeze-drying is the standard answer for peptides that are marginally stable in solution. Source sentenceThe solidification performed at lower temperature significantly improves storage stability of proteins, peptides ... which are marginally stable in aqueous solutions.1 Adv Exp Med Biol 2018 |
| Amount control | Loading and delivered amount differ: 29 µg loaded and 18 µg apparently delivered in rat skin for one semaglutide patch. Source sentence29 ± 2 μg semaglutide per patch, with an apparent delivered amount of 18 ± 2 μg (63 ± 3%; n = 3)8 Int J Pharm 2026 | Net content is reported per lot on the certificate of analysis. Source sentenceNet content is one of the three lines of the Peptency certificate of analysis.9 Peptency lab results and certificate of analysis page |
| How it is tested | Mechanical strength, insertion, release, skin permeation and delivered amount, plus extract purity and identity. Source sentenceAbstract: critical quality attributes include delivered amount and puncture performance.10 J Control Release 202511 Int J Pharm 2016 | HPLC purity, LC-MS identity and net content on the certificate of analysis. Source sentenceLab results page: HPLC purity, LC-MS identity, net content.9 Peptency lab results and certificate of analysis page |
The vial side: freeze-drying and the dry peptide
- Solid-state formulation is described as the usual route to keep peptides and proteins stable in storage and transport, because liquid forms often degrade chemically during handling. Source sentence
Solid formulations are frequently required to maintain protein stability during storage, transport and upon administration.
12 Ther Deliv 2015 - A 2010 review separates chemical instability from physical instability and covers stabilisation in aqueous solution and in the dried state. Source sentence
sections are included on stabilization in aqueous solution and the dried state
13 Pharm Res 2010
The patch side: fabrication and storage
- In a stratified exenatide patch, dextran and polyvinyl alcohol stabilised the peptide best over 9 weeks at high temperature. Zinc sulfate added stability through a zinc and peptide complex. Source sentence
dextran and polyvinyl alcohol (PVA) were the best at stabilizing EXT under high-temperature storage for 9 weeks
7 Int J Pharm 2023 - After 3 months, the amount of exenatide left in that patch did not differ between storage at 40 °C and at -20 °C. Source sentence
the remaining EXT amount was not significantly different under storage at 40 °C and -20 °C for 3 months
7 Int J Pharm 2023 - In a salmon calcitonin microneedle array, adding trehalose went with higher stability under high temperature and humidity. Source sentence
the addition of trehalose could improve the stability of sCT in DMNA under high temperature and humidity
14 AAPS PharmSciTech 2020 - A teriparatide patch used hyaluronic acid and trehalose, and activity loss during drying was monitored across polymer solutions. Source sentence
TA activity reduction during the drying process of various TA polymer solutions formulated with hyaluronic acid and trehalose was monitored and homogeneities were assessed.
15 Polymers 2022
Storage temperature claims
- The authors of the stratified exenatide patch conclude that the format reduces dependence on low-temperature storage. Source sentence
Abstract, final sentence: the stability result supports reduced dependence on low-temperature storage and transport.
7 Int J Pharm 2023
Is a peptide more stable in a patch than in a vial?
Query run on 11 November 2026; no head to head comparison in the results.6 PubMed search for peptide patch and lyophilised stability, 11 November 20267 Int J Pharm 20231 Adv Exp Med Biol 2018
What does moisture do to a dried peptide?
Increases in moisture and glycerol contents increased the rate of peptide deamidation.4 J Pharm Sci 19995 Pharm Res 2014
Which stabilisers do peptide patches use?
the addition of trehalose could improve the stability of sCT in DMNA under high temperature and humidity14 AAPS PharmSciTech 202015 Polymers 20223 AAPS PharmSciTech 20267 Int J Pharm 2023
Published examples with IDs
RodentInternational journal of pharmaceutics 2023
Retained exenatide after 9 weeks at high temperature and 3 months at 40 °C and -20 °C
- Design
- Stratified dissolving microneedles with dextran, polyvinyl alcohol and zinc, stored at high temperature
- Population or model
- Rats
- Molecule
- Exenatide related form
- Duration
- 9 weeks and 3 months
RodentPharmaceutical research 2014
Dissolution within 2 minutes, skin barrier recovery in 10 to 12 hours and activity after one month of storage
- Design
- Hyaluronate dissolving microneedles: strength, insertion, dissolution, storage and exposure
- Population or model
- Rats
- Molecule
- Exenatide related form
- Duration
- 1 month storage
RodentInternational journal of nanomedicine 2025
Fracture force of 0.37 N per microneedle, stability at 25 °C and systemic exposure versus free drug microneedles
- Design
- Hyaluronic acid and aminoclay nanocomposite microneedles tested for strength, storage stability and exposure in rats
- Population or model
- Rats
- Molecule
- Semaglutide exact
In vitro or ex vivoAAPS PharmSciTech 2026
Fracture force, Parafilm insertion depth, release over 12 hours and ex vivo porcine skin insertion
- Design
- Formulation and characterisation of dissolving microneedles with hyaluronic acid, PETOX and L-arginine
- Population or model
- Parafilm M, porcine skin ex vivo
- Molecule
- Semaglutide exact
RodentPolymers 2022
Delivery into porcine skin after 5 minutes and relative bioavailability in rats
- Design
- Two layer teriparatide dissolving microneedle patch made by centrifugal lithography
- Population or model
- Porcine skin ex vivo, rats
- Molecule
- Teriparatide related form
Sources
- 1Adv Exp Med Biol 2018 accessed 11 Nov 2026
- 2Sci Rep 2018 accessed 11 Nov 2026
- 3AAPS PharmSciTech 2026 accessed 11 Nov 2026
- 4J Pharm Sci 1999 accessed 11 Nov 2026
- 5Pharm Res 2014 accessed 11 Nov 2026
- 6PubMed search for peptide patch and lyophilised stability, 11 November 2026 accessed 11 Nov 2026
- 7Int J Pharm 2023 accessed 11 Nov 2026
- 8Int J Pharm 2026 accessed 11 Nov 2026
- 9Peptency lab results and certificate of analysis page accessed 11 Nov 2026
- 10J Control Release 2025 accessed 11 Nov 2026
- 11Int J Pharm 2016 accessed 11 Nov 2026
- 12Ther Deliv 2015 accessed 11 Nov 2026
- 13Pharm Res 2010 accessed 11 Nov 2026
- 14AAPS PharmSciTech 2020 accessed 11 Nov 2026
- 15Polymers 2022 accessed 11 Nov 2026
- 16Int J Nanomedicine 2025 accessed 11 Nov 2026
About this page
Research-use information. This library summarises published literature and regulator records. It is not guidance for use, not medical advice, and not a statement that any material is suitable for use in people or animals.
Reviewed by the Peptency editorial process. Version 1, edited 11 November 2026, 16 sources.
Cite this page: Peptency Academy. Peptide stability in patches versus lyophilised vials. Version 1./eu/academy/guides/peptide-stability-patches-vs-lyophilised-vials/