Ordering from the Americas?Switch to the US store
We don't ship to your country yet. We ship across Europe and the Americas. You can keep browsing.

Peptency Academy · Guide

Microneedle patches for peptides: types and how they are studied

What types of microneedle patch are used for peptides, and what do studies measure?

A microneedle patch is a micron scale hybrid between a transdermal patch and the hypodermic format: an array of tiny projections that open short routes through the outer skin. Source sentenceMicroneedles (MN) are the micron-scale hybrid between transdermal patches and hypodermic syringes.1 Drug Deliv Transl Res 2022 Wu and colleagues grouped microneedles into insoluble solid, hollow, soluble solid and phase transition types. Source sentenceinsoluble solid microneedles, hollow microneedles, soluble/degradable solid microneedles and phase-transition microneedles2 Curr Pharm Biotechnol 2012 A polyvinyl alcohol patch with 15 by 15 microneedles held 29 ± 2 µg of semaglutide per patch. The apparent delivered amount in rat skin was 18 ± 2 µg, or 63 ± 3 percent (n = 3). Source sentenceSema-MNs contained 29 ± 2 μg semaglutide per patch, with an apparent delivered amount of 18 ± 2 μg (63 ± 3%; n = 3)3 Int J Pharm 2026

Version 1Edited 18 sources

Known, not known, contested

Known

  • Microneedle designs fall into solid, coated, hollow and polymer groups. Polymer microneedles can dissolve, stay intact, or form a hydrogel. Source sentenceMultiple microneedles designs have been fabricated i.e. solid, coated, hollow, and polymer microneedles.1 Drug Deliv Transl Res 2022
  • Conventional dissolving patches load little peptide because the microneedles are small and the drug is mixed with excipients. Source sentencedissolving MN patches are limited by low drug loading capacities due to their small size and admixture of drug and water-soluble excipients4 Drug Deliv Transl Res 2025
  • More than 90 percent of the labelled cargo left that patch within 30 minutes, and rat skin barrier function approached baseline within 4 to 6 hours. Source sentencereleased more than 90% of the Sema-Cy5-associated cargo within 30 min ... skin barrier function approached baseline within 4-6 h3 Int J Pharm 2026
  • In minipigs a 7 day repeat application of the pure tip liraglutide patch caused mild erythema within 4 hours and no further irritation. Source sentenceno skin irritation was observed in minipigs except for mild erythema occurring within 4 h4 Drug Deliv Transl Res 2025

Not known

Contested

Nothing listed yet.

Where each route acts in the skin
  • Stratum corneum
  • Viable epidermis
  • Dermis
  1. Passive patch
  2. Chemical permeation agent
  3. Iontophoresis
  4. Solid microneedles
  5. Coated microneedles
  6. Dissolving microneedles
  7. Hollow microneedles
  8. Hydrogel forming microneedles

Not to scale. Each route is described and cited in the list that follows.

The microneedle types

Solid microneedles
Solid microneedles make openings in the skin first. A formulation or patch goes on the openings afterwards. Source sentenceSolid microneedles a patch is applied after creating a hole in the skin1 Drug Deliv Transl Res 2022
Coated microneedles
Coated microneedles carry the drug as a layer on the surface of the microneedle. Source sentenceDrugs are coated on the surface of Coated microneedles1 Drug Deliv Transl Res 2022
Dissolving microneedles
Dissolving microneedles hold the peptide inside a polymer that dissolves in the skin. An exenatide hyaluronate patch released its load within 2 minutes in one study. Source sentencerapidly dissolved to release encapsulated drug within 2 min8 Pharm Res 2014
Hollow microneedles
Hollow microneedles carry a liquid formulation through a bore, a design close to a hypodermic but much shorter. Source sentenceHollow microneedles are shorter in length but similar to hypodermic needles and have pore for infusion of liquid formulation of the drug.1 Drug Deliv Transl Res 2022
Hydrogel forming microneedles
Hydrogel forming microneedles are a polymer class listed beside dissolving and non-dissolving types. Source sentencePolymer microneedles can be of different types like dissolving, non-dissolving or hydrogel-forming made up of polymers.1 Drug Deliv Transl Res 2022
Osmotic hollow patch
A wearable osmotic patch with three hollow microneedles released exenatide in rats and mice for 24 hours, in a study of sustained release. Source sentenceThe OMN patch released the peptide drug exenatide in rats and mice for 24 hours9 Sci Transl Med 2024

How the patches are made

  • Micromold casting is the common fabrication route. One exenatide patch was cast in a micromold, and a PVA semaglutide patch was cast by vacuum assisted molding followed by drying at room temperature. Source sentenceprepared semaglutide-loaded poly(vinyl alcohol) (PVA) dissolving microneedles (Sema-MNs) by sequential vacuum-assisted molding and room-temperature drying3 Int J Pharm 20268 Pharm Res 2014
  • A hyaluronic acid and aminoclay patch was poured into a negative polydimethylsiloxane mold, and a teriparatide patch was made by centrifugal lithography in two layers. Source sentencepoured into a reverse polydimethylsiloxane (PDMS) mold to create dissolving microneedles10 Int J Nanomedicine 202511 Polymers 2022
  • Two layer designs keep the peptide in the tip. The teriparatide patch had a pure hyaluronic acid base layer and a peptide polymer top layer, and 87.6 percent of the peptide reached porcine skin after 5 minutes. Source sentencedried pure hyaluronic acid on the base layer and dried TA polymer solution on the top layer ... 87.6% of TA was delivered to the porcine skin after a 5-min TA-DMN patch application11 Polymers 2022
  • A stratified exenatide patch put a dextran and zinc complex in the tip and polyvinyl alcohol in the base. Source sentencea tip layer (dextran encapsulating the Zn2+-EXT complex) and a base layer (PVA)12 Int J Pharm 2023

Loading, strength and what reaches the skin

  • Conventional dissolving patches load little peptide because the microneedles are small and the drug is mixed with excipients. Source sentencedissolving MN patches are limited by low drug loading capacities due to their small size and admixture of drug and water-soluble excipients4 Drug Deliv Transl Res 2025
  • A liraglutide patch with pure drug tips loaded up to 2.21 ± 0.14 mg in 0.9 cm², nearly two orders of magnitude more than conventional dissolving patches of the same size. Source sentenceThe MN patch could load up to 2.21 ± 0.14 mg of liraglutide in a patch size of 0.9 cm2, which was nearly two orders of magnitude higher than that obtained with conventional MN patches of the same size.4 Drug Deliv Transl Res 2025
  • Fracture force per microneedle is a standard mechanical readout: 3.47 N in one semaglutide patch and 0.37 N in another. Source sentencerobust mechanical strength (3.47 N/needle; fracture force)13 AAPS PharmSciTech 202610 Int J Nanomedicine 2025
  • A polyvinyl alcohol patch with 15 by 15 microneedles held 29 ± 2 µg of semaglutide per patch. The apparent delivered amount in rat skin was 18 ± 2 µg, or 63 ± 3 percent (n = 3). Source sentenceSema-MNs contained 29 ± 2 μg semaglutide per patch, with an apparent delivered amount of 18 ± 2 μg (63 ± 3%; n = 3)3 Int J Pharm 2026
  • More than 90 percent of the labelled cargo left that patch within 30 minutes, and rat skin barrier function approached baseline within 4 to 6 hours. Source sentencereleased more than 90% of the Sema-Cy5-associated cargo within 30 min ... skin barrier function approached baseline within 4-6 h3 Int J Pharm 2026

What happens to the skin

  • An exenatide hyaluronate patch kept the peptide's activity through fabrication and one month of storage. Skin barrier function recovered within 10 to 12 hours. Source sentenceThe EXT preserved its pharmacological activity during fabrication and one-month storage. ... skin's barrier properties disrupted by MNs recovered within 10-12 h.8 Pharm Res 2014
  • In minipigs a 7 day repeat application of the pure tip liraglutide patch caused mild erythema within 4 hours and no further irritation. Source sentenceno skin irritation was observed in minipigs except for mild erythema occurring within 4 h4 Drug Deliv Transl Res 2025

Peptides that reached human studies

  • A coated microneedle patch of parathyroid hormone (1-34) was studied in phase 1 for application site, wear time and amount, then in phase 2 against a placebo patch and a parenteral reference. Source sentenceAbstract, methods: phase 1 pharmacokinetic studies varied application site, wear time and amount in volunteers aged 40 to 85; phase 2 compared patch levels with a placebo patch and a reference product.14 Pharm Res 2011
  • An abaloparatide solid microstructured transdermal system reached phase 1b in 22 postmenopausal participants, with systemic exposure as the primary endpoint. Median time to peak on day 1 was 0.33 hours. Source sentenceThe primary endpoint was systemic exposure to abaloparatide ... the median time to reach maximum concentration (Tmax) for abaloparatide-sMTS was 0.33 h15 Clin Drug Investig 2021
  • Salmon calcitonin dissolving arrays reached about 70 percent relative bioavailability in a pharmacodynamic study. Source sentenceDMNA patch could significantly enhanced relative bioavailability to approximately 70%16 AAPS PharmSciTech 2020
  • A weekly teriparatide dissolving patch reached 66.9 percent relative bioavailability in rats. Source sentenceThe relative bioavailability of TA via subcutaneous injection was 66.9% in rats treated with TA-DMN patches.11 Polymers 2022

What is a dissolving microneedle patch?

A dissolving microneedle patch holds the peptide inside a polymer, such as hyaluronic acid or polyvinyl alcohol, that dissolves in the skin. Reported release times run from 2 minutes to 12 hours depending on the polymer and the test. Source sentencerapidly dissolved to release encapsulated drug within 2 min8 Pharm Res 201413 AAPS PharmSciTech 2026

How long are microneedles?

Reported microneedle heights are hundreds of micrometres, for example 600 µm in a 196 microneedle array, and insertion has been measured to 450 µm depth in Parafilm. Source sentenceDissolving MN arrays containing 196 needles (600 μm needle height)17 Int J Pharm 201613 AAPS PharmSciTech 2026

Is a microneedle patch the same as a microneedling roller?

Aesthetic microneedling devices are a separate regulated class from drug loaded microneedle patches: Class II devices under 21 CFR 878.4430. (reported by FDA, read through a search summary) Source sentenceFDA page: microneedling devices for aesthetic use are Class II.18 FDA, Microneedling devices page

Published examples with IDs

  1. In vitro or ex vivoAAPS PharmSciTech 2026

    Fracture force, Parafilm insertion depth, release over 12 hours and ex vivo porcine skin insertion

    Design
    Formulation and characterisation of dissolving microneedles with hyaluronic acid, PETOX and L-arginine
    Population or model
    Parafilm M, porcine skin ex vivo
    Molecule
    Semaglutide exact

    PubMed 42393458DOI

  2. RodentInternational journal of pharmaceutics 2026

    Loading per patch, apparent delivered amount, release within 30 minutes and skin barrier recovery

    Design
    Polyvinyl alcohol dissolving microneedles made by vacuum assisted molding, tested in rat skin
    Population or model
    Rats
    Molecule
    Semaglutide exact
    n
    3
    Comparator
    Unloaded microneedle controls

    PubMed 42906796DOI

  3. RodentInternational journal of nanomedicine 2025

    Fracture force of 0.37 N per microneedle, stability at 25 °C and systemic exposure versus free drug microneedles

    Design
    Hyaluronic acid and aminoclay nanocomposite microneedles tested for strength, storage stability and exposure in rats
    Population or model
    Rats
    Molecule
    Semaglutide exact

    PubMed 41030572DOI

  4. RodentDrug delivery and translational research 2025

    Loading up to 2.21 mg per 0.9 cm², delivered amount, relative bioavailability and local skin response

    Design
    Dissolving microneedle patch with pure drug tips, pharmacokinetics in rats and minipigs
    Population or model
    Rats and minipigs
    Molecule
    Liraglutide related form

    PubMed 38619705DOI

  5. RodentPharmaceutical research 2014

    Dissolution within 2 minutes, skin barrier recovery in 10 to 12 hours and activity after one month of storage

    Design
    Hyaluronate dissolving microneedles: strength, insertion, dissolution, storage and exposure
    Population or model
    Rats
    Molecule
    Exenatide related form
    Duration
    1 month storage

    PubMed 24867426DOI

  6. RodentInternational journal of pharmaceutics 2023

    Retained exenatide after 9 weeks at high temperature and 3 months at 40 °C and -20 °C

    Design
    Stratified dissolving microneedles with dextran, polyvinyl alcohol and zinc, stored at high temperature
    Population or model
    Rats
    Molecule
    Exenatide related form
    Duration
    9 weeks and 3 months

    PubMed 36934885DOI

  7. RodentPolymers 2022

    Delivery into porcine skin after 5 minutes and relative bioavailability in rats

    Design
    Two layer teriparatide dissolving microneedle patch made by centrifugal lithography
    Population or model
    Porcine skin ex vivo, rats
    Molecule
    Teriparatide related form

    PubMed 36235975DOI

  8. Analytical only (no biological model)International journal of pharmaceutics 2016

    Release of model cargos from 196 microneedle arrays over 6 hours

    Design
    Parafilm M pouch release test compared with Franz cell methodology for dissolving arrays
    Population or model
    Parafilm M membrane
    Molecule
    Model cargos not established

    PubMed 26621687DOI

Sources

  1. 1Drug Deliv Transl Res 2022 accessed 11 Nov 2026
  2. 2Curr Pharm Biotechnol 2012 accessed 11 Nov 2026
  3. 3Int J Pharm 2026 accessed 11 Nov 2026
  4. 4Drug Deliv Transl Res 2025 accessed 11 Nov 2026
  5. 5PubMed search for peptide patch and lyophilised stability, 11 November 2026 accessed 11 Nov 2026
  6. 6Nat Biotechnol 2008 accessed 11 Nov 2026
  7. 7Adv Drug Deliv Rev 2004 accessed 11 Nov 2026
  8. 8Pharm Res 2014 accessed 11 Nov 2026
  9. 9Sci Transl Med 2024 accessed 11 Nov 2026
  10. 10Int J Nanomedicine 2025 accessed 11 Nov 2026
  11. 11Polymers 2022 accessed 11 Nov 2026
  12. 12Int J Pharm 2023 accessed 11 Nov 2026
  13. 13AAPS PharmSciTech 2026 accessed 11 Nov 2026
  14. 14Pharm Res 2011 accessed 11 Nov 2026
  15. 15Clin Drug Investig 2021 accessed 11 Nov 2026
  16. 16AAPS PharmSciTech 2020 accessed 11 Nov 2026
  17. 17Int J Pharm 2016 accessed 11 Nov 2026
  18. 18FDA, Microneedling devices page accessed 11 Nov 2026

About this page

Research-use information. This library summarises published literature and regulator records. It is not guidance for use, not medical advice, and not a statement that any material is suitable for use in people or animals.

Reviewed by the Peptency editorial process. Version 1, edited 11 November 2026, 18 sources.

Cite this page: Peptency Academy. Microneedle patches for peptides: types and how they are studied. Version 1./eu/academy/guides/microneedle-patches-for-peptides/