Ordering from outside the Americas?Switch to the EU store
We don't ship to your country yet. We ship across Europe and the Americas. You can keep browsing.

Peptency Academy · Guide

Peptide stability in patches versus lyophilised vials

How does peptide stability in a microneedle patch compare with a lyophilised vial?

Freeze-drying is used because it raises the storage stability of peptides that are only marginally stable in solution. Source sentenceThe solidification performed at lower temperature significantly improves storage stability of proteins, peptides, antibiotics, vaccines, and liposomes, which are marginally stable in aqueous solutions.1 Adv Exp Med Biol 2018 Exendin-4 kept up to 98.3 ± 1.5 percent of its activity in dissolving microneedles, but only after thermal, chemical and physical fabrication parameters had been tuned. Source sentenceoptimising the parameters involved in DMN fabrication retained the activity of Ex-4 by up to 98.3 ± 1.5%2 Sci Rep 2018 The authors of a 2026 semaglutide patch study name loss of peptide activity and stability as challenges that remain. Source sentencechallenges persist regarding loss of therapeutic activity and stability of peptide3 AAPS PharmSciTech 2026

Version 1Edited 16 sources

Known, not known, contested

Known

  • Disaccharides such as trehalose and sucrose, and amino acids, can embed the active in a glass with low molecular mobility, which lowers chemical reactivity. Source sentenceSome excipients embed the active ingredients in glass-state solids with low molecular mobility, thereby reducing chemical reactivity.1 Adv Exp Med Biol 2018
  • In lyophilised peptide and polymer formulations, more moisture and more plasticiser raised the rate of deamidation. Source sentenceIncreases in moisture and glycerol contents increased the rate of peptide deamidation.4 J Pharm Sci 1999
  • Water content weakens dissolving microneedles: in the exenatide hyaluronate study, strength fell as water content rose. Source sentencethe strength could be weakened as the water content increases5 Pharm Res 2014

Not known

Contested

  • The authors of the stratified exenatide patch conclude that the format reduces dependence on low-temperature storage. Source sentenceAbstract, final sentence: the stability result supports reduced dependence on low-temperature storage and transport.7 Int J Pharm 2023

Patch and lyophilised vial side by side

Microneedle patch as studied in the literature, and the lyophilised vial, on three questions
QuestionMicroneedle patch, as studiedLyophilised vial
Stability in storageStability depends on the matrix and on fabrication. In one exenatide patch the remaining peptide did not differ between 40 °C and -20 °C over 3 months. Source sentencethe remaining EXT amount was not significantly different under storage at 40 °C and -20 °C for 3 months7 Int J Pharm 2023Freeze-drying is the standard answer for peptides that are marginally stable in solution. Source sentenceThe solidification performed at lower temperature significantly improves storage stability of proteins, peptides ... which are marginally stable in aqueous solutions.1 Adv Exp Med Biol 2018
Amount controlLoading and delivered amount differ: 29 µg loaded and 18 µg apparently delivered in rat skin for one semaglutide patch. Source sentence29 ± 2 μg semaglutide per patch, with an apparent delivered amount of 18 ± 2 μg (63 ± 3%; n = 3)8 Int J Pharm 2026Net content is reported per lot on the certificate of analysis. Source sentenceNet content is one of the three lines of the Peptency certificate of analysis.9 Peptency lab results and certificate of analysis page
How it is testedMechanical strength, insertion, release, skin permeation and delivered amount, plus extract purity and identity. Source sentenceAbstract: critical quality attributes include delivered amount and puncture performance.10 J Control Release 202511 Int J Pharm 2016HPLC purity, LC-MS identity and net content on the certificate of analysis. Source sentenceLab results page: HPLC purity, LC-MS identity, net content.9 Peptency lab results and certificate of analysis page

The vial side: freeze-drying and the dry peptide

  • Solid-state formulation is described as the usual route to keep peptides and proteins stable in storage and transport, because liquid forms often degrade chemically during handling. Source sentenceSolid formulations are frequently required to maintain protein stability during storage, transport and upon administration.12 Ther Deliv 2015
  • A 2010 review separates chemical instability from physical instability and covers stabilisation in aqueous solution and in the dried state. Source sentencesections are included on stabilization in aqueous solution and the dried state13 Pharm Res 2010

The patch side: fabrication and storage

  • In a stratified exenatide patch, dextran and polyvinyl alcohol stabilised the peptide best over 9 weeks at high temperature. Zinc sulfate added stability through a zinc and peptide complex. Source sentencedextran and polyvinyl alcohol (PVA) were the best at stabilizing EXT under high-temperature storage for 9 weeks7 Int J Pharm 2023
  • After 3 months, the amount of exenatide left in that patch did not differ between storage at 40 °C and at -20 °C. Source sentencethe remaining EXT amount was not significantly different under storage at 40 °C and -20 °C for 3 months7 Int J Pharm 2023
  • In a salmon calcitonin microneedle array, adding trehalose went with higher stability under high temperature and humidity. Source sentencethe addition of trehalose could improve the stability of sCT in DMNA under high temperature and humidity14 AAPS PharmSciTech 2020
  • A teriparatide patch used hyaluronic acid and trehalose, and activity loss during drying was monitored across polymer solutions. Source sentenceTA activity reduction during the drying process of various TA polymer solutions formulated with hyaluronic acid and trehalose was monitored and homogeneities were assessed.15 Polymers 2022

Storage temperature claims

  • The authors of the stratified exenatide patch conclude that the format reduces dependence on low-temperature storage. Source sentenceAbstract, final sentence: the stability result supports reduced dependence on low-temperature storage and transport.7 Int J Pharm 2023

Is a peptide more stable in a patch than in a vial?

No direct comparison exists in the published record. Patch papers report stability at 25 °C, 40 °C or -20 °C for weeks to months, while the vial side rests on freeze-drying reviews and on peptide chemistry such as deamidation. Source sentenceQuery run on 11 November 2026; no head to head comparison in the results.6 PubMed search for peptide patch and lyophilised stability, 11 November 20267 Int J Pharm 20231 Adv Exp Med Biol 2018

What does moisture do to a dried peptide?

Moisture speeds chemical breakdown of a dried peptide in a polymer, and moisture also softens a dissolving patch. Source sentenceIncreases in moisture and glycerol contents increased the rate of peptide deamidation.4 J Pharm Sci 19995 Pharm Res 2014

Which stabilisers do peptide patches use?

Patch papers name trehalose for calcitonin and teriparatide, L-arginine for semaglutide, dextran, polyvinyl alcohol and zinc for exenatide. Source sentencethe addition of trehalose could improve the stability of sCT in DMNA under high temperature and humidity14 AAPS PharmSciTech 202015 Polymers 20223 AAPS PharmSciTech 20267 Int J Pharm 2023

Published examples with IDs

  1. RodentInternational journal of pharmaceutics 2023

    Retained exenatide after 9 weeks at high temperature and 3 months at 40 °C and -20 °C

    Design
    Stratified dissolving microneedles with dextran, polyvinyl alcohol and zinc, stored at high temperature
    Population or model
    Rats
    Molecule
    Exenatide related form
    Duration
    9 weeks and 3 months

    PubMed 36934885DOI

  2. RodentPharmaceutical research 2014

    Dissolution within 2 minutes, skin barrier recovery in 10 to 12 hours and activity after one month of storage

    Design
    Hyaluronate dissolving microneedles: strength, insertion, dissolution, storage and exposure
    Population or model
    Rats
    Molecule
    Exenatide related form
    Duration
    1 month storage

    PubMed 24867426DOI

  3. RodentInternational journal of nanomedicine 2025

    Fracture force of 0.37 N per microneedle, stability at 25 °C and systemic exposure versus free drug microneedles

    Design
    Hyaluronic acid and aminoclay nanocomposite microneedles tested for strength, storage stability and exposure in rats
    Population or model
    Rats
    Molecule
    Semaglutide exact

    PubMed 41030572DOI

  4. In vitro or ex vivoAAPS PharmSciTech 2026

    Fracture force, Parafilm insertion depth, release over 12 hours and ex vivo porcine skin insertion

    Design
    Formulation and characterisation of dissolving microneedles with hyaluronic acid, PETOX and L-arginine
    Population or model
    Parafilm M, porcine skin ex vivo
    Molecule
    Semaglutide exact

    PubMed 42393458DOI

  5. RodentPolymers 2022

    Delivery into porcine skin after 5 minutes and relative bioavailability in rats

    Design
    Two layer teriparatide dissolving microneedle patch made by centrifugal lithography
    Population or model
    Porcine skin ex vivo, rats
    Molecule
    Teriparatide related form

    PubMed 36235975DOI

Sources

  1. 1Adv Exp Med Biol 2018 accessed 11 Nov 2026
  2. 2Sci Rep 2018 accessed 11 Nov 2026
  3. 3AAPS PharmSciTech 2026 accessed 11 Nov 2026
  4. 4J Pharm Sci 1999 accessed 11 Nov 2026
  5. 5Pharm Res 2014 accessed 11 Nov 2026
  6. 6PubMed search for peptide patch and lyophilised stability, 11 November 2026 accessed 11 Nov 2026
  7. 7Int J Pharm 2023 accessed 11 Nov 2026
  8. 8Int J Pharm 2026 accessed 11 Nov 2026
  9. 9Peptency lab results and certificate of analysis page accessed 11 Nov 2026
  10. 10J Control Release 2025 accessed 11 Nov 2026
  11. 11Int J Pharm 2016 accessed 11 Nov 2026
  12. 12Ther Deliv 2015 accessed 11 Nov 2026
  13. 13Pharm Res 2010 accessed 11 Nov 2026
  14. 14AAPS PharmSciTech 2020 accessed 11 Nov 2026
  15. 15Polymers 2022 accessed 11 Nov 2026
  16. 16Int J Nanomedicine 2025 accessed 11 Nov 2026

About this page

Research-use information. This library summarises published literature and regulator records. It is not guidance for use, not medical advice, and not a statement that any material is suitable for use in people or animals.

Reviewed by the Peptency editorial process. Version 1, edited 11 November 2026, 16 sources.

Cite this page: Peptency Academy. Peptide stability in patches versus lyophilised vials. Version 1./us/academy/guides/peptide-stability-patches-vs-lyophilised-vials/